Published: November 12, 2024
Sunset: Active
Impacted Documents
collaborative PP-Module for Biometric enrolment and verification - for unlocking the device - [BIOPP-Module] v1.1
References
8.4.1.5 Management of the Biometric System configuration
Issue Description
The reference to the PP_MDF_V3.3 for management of the biometric system is FMT_SMF_EXT.1, while the PP actually uses FMT_SMF.1. Additionally the enabling/disabling of the BAF is incorrectly referenced as Management Function 23, and the correct reference is 22.
Resolution
Supporting Document v1.1
The following rows were changed (changes shown in italics):
| Sub-section name | Description | |
|---|---|---|
Original Text |
8.4.1.5 Management of the Biometric System configuration |
The mobile device shall enable/disable the BAF as required by FMT_SMF_EXT.1 (Management function 23), and revoke the BAF as FMT_SMF_EXT.1 (Management Function 46). Any change to the BAF (e.g. adding or revoking templates) requires re-authentication via the Password Authentication Factor as required by FIA_UAU.6.2. |
BIO0005 Text |
8.4.1.5 Management of the Biometric System configuration |
The mobile device shall enable/disable the BAF as required by FMT_SMF.1 (Management function 22), and revoke the BAF as FMT_SMF.1 (Management Function 46). Any change to the BAF (e.g. adding or revoking templates) requires re-authentication via the Password Authentication Factor as required by FIA_UAU.6.2. |